Notes on Dynamic Systems and the Value Function

 

Dynamic systems can be described by differential and difference equations. Without a loss of generality, consider a dynamic system represented by a difference equation: \(x_{k+1}=f\left(x_{k}\right)\). The state of the system is represented by \(x\) and the function \(f\) is the mapping from one state to the next. One way to characterize a dynamic system is with an additive cost: \(J\). An additive cost summarizes the cost of operation for the system from some initial state, \(x_{0}\). To ensure that the sums are finite an exponential weighting factor, \(alpha\), is introduced. This factor has a value between between 0 and 1.  Under some circumstances, \(alpha\) can be equal to one. One special case is where the system is guaranteed to eventually enter a zero cost state. However, in general, it will need to be less than one. This additive cost is a function of each initial condition:

\(J\left(x_{0}\right)=\sum_{k=0}^{\infty}\left(\alpha^{k}\cdot c\left(x_{k}\right)\right)\).

(1)

The value of the additive cost can be solved using the dynamic programming equations:

\(V\left(x\right)=c\left(x\right)+\alpha^{k}\cdot V\left(f\left(x\right)\right)\).

(2)

The function \(V\) is referred to as the value function.

This work is licensed under a Creative Commons Attribution By license.